The Informer100 Speaker has an internal 100 watt amplifier and driver to deliver intelligible voice messages from prerecorded files or from the Federal Signal Commander VOIP network system. Ambient Level Monitor enables speaker to automatically adjust speaker volume in relationship to ambient noise level. It also has remote volume control for optimizing sound levels across your alerting area.

Informer100 Speaker includes two relay outputs for controlling strobes or other devices. It’s designed for outdoor use or large indoor structures; and available in 24 VDC or 120/240 VAC. All wiring interfaces accessible via internal connectors for quick and easy installation.

With 11 standard voltage groups, a VA range from 50VA to 1500VA and available with standard secondary and optional primary fuse kits, the HPS Imperator® series provides the perfect solution for any application.

The HPS Imperator’s unique terminal block design allows for the quick and easy installation of standard secondary or optional primary 13/32″ x 1 1/2″ midget/type CC fuse clips on every unit. This is the simplest and most inexpensive fusing installation provided on any industrial control transformer in the market today.

Features:
• Indoor/Outdoor IP-enabled speaker with high-powered voice and tone
• Available in 24 VDC or 120/240 VAC
• Ambient SPL monitor with automatic volume control
• Remote volume control
• Broadcasts live voice, text-to-speech and prerecorded voice or tone files
• Integral 100 watt amplifier and ethernet interface simplifies installation
• 15 minute audio storage, with up to 250 .WAV files
• Fully supervised using Commander software
• Wall or pole mount available
• Four initiation inputs, i.e. Panic button alarm
• Optional visual LED or strobe alerting devices available
• NEMA 4X outdoor rated
• UL and cUL Listed (currently pending, to be obtained by May 31, 2017)

Specifications:
• Two Relay Outputs rated at 8A @ 240VAC. Relay outputs can be programmed to cycle on and off, or come on continuously with the on time, off time, and total-time being programmable.They can also be programed to control strobe lights or other devices
• Tone and voice compatible with Federal Signal Commander and UltraVoice controllers (Requires Commander version 14.8.x or higher)
• Small size with rugged construction
• Input: 24VDC, 5A maximum 120/240VAC, 50/60Hz, 1.5A/.78A maximum
• Maximum Sound Pressure Level 120dB (+/- 2dB) @ 10′ (130 dB (+/-2 dB) @ 1 m)
• Wired Ethernet
• Adjustable volume control and ambient noise monitoring with auto-level adjustment
• Wall or pole mount options
• Up to four direct wire input for customer supplied panic button alarm
• Requires minimal network bandwidth and uses TCP/IP protocol
• Works with redundant Commander network servers for reliable fail-safe operation
• Federal Signal Commander software provides full two-way control and status monitoring of the Informer100