T&B is excited to introduce another innovative solution that addresses the complexities of coupling two rigid PVC conduit systems:The T&B® Fittings Non-Metallic Expansion/Deflection Coupling. Until now, the only available solutions in the market were either using metallic expansion/deflection couplings, which are very expensive for a PVC system, or an improvised, unsafe and labor-intensive solution involvingRead more about Thomas and Betts – Non-Metallic Expansion Deflection Couplings[…]

Description Low smoke, zero halogen raceway Low toxicity generation characteristics Hot dipped zinc galvanized low carbon steel core Excellent temperature ratings Black thermoplastic polyurethane jacket UL® copper bonding strip 3/8“ – 11⁄4” for grounding Sunlight resistant Flame retardant TPU jacket Applications Wherever limiting toxic material of combustion is needed Direct burial and concrete embedment BondRead more about AFC Cable Systems – Low Smoke Zero Halogen (Specialty LiquidTite)[…]

Today, capturing the sun’s energy for conversion to electricity is at the forefront in our industry. ILSCO has become an industry leader as a component manufacturer which supplies grounding, bonding and connectivity solutions to the solar industry. Download More Information Here Want some more information on this product? Click the button below and one ofRead more about Ilsco Solar – Grounding, Bonding and Connectivity Solutions for the Solar Industry[…]

Eaton’s continues to improve water and wastewater infrastructures so they become more reliable, efficient and safe. Recently, Eaton introduced a cost-effective solution to handle sags that result in the loss of UV treatment systems. The use of sag ride through (SRT) allows facilities to improve the overall percentage of water they are fully treating, thusRead more about Eaton – Water and Wastewater Treatment Solutions[…]

NO TOOLS! Arlington’s new one-piece Retrofit SNAP2IT fittings are easy to use in an old work installation and handle the widest variety of cables. They are ideal for adding additional circuits to a load center. And you get the same labor-savings in a retrofit installation! Installation is quick and easy with NO TOOLS required. InstallRead more about Arlington – SNAP2IT® Connectors[…]

Core Construction HPS cores are manufactured from the highest quality non-aging, cold rolled, silicon steel laminations. Cores are precision cut to close tolerances to eliminate burrs and interleaved to improve performance. Full mitre stepped core construction is used for our very high efficiency transformers. Coil Construction Coils are available in either aluminum or copper construction.Read more about Hammond Power Solutions – Get More & Save Time with HPS Distribution Transformers[…]

Mersen’s Air-to-Air Heat exchangers are an ideal cooling solution for industrial cabinets in which heat generating semi-conductor switching devices such as IGBTs or SCRs are located. Our Air-to-Air Heat Exchangers are designed to move warm air away from the cabinet, then cool it by passing the air through a specially designed sealed heat sink, andRead more about Mersen – Air-to-Air Heat Exchangers[…]

CADDY® ALL-IN-ONE electrical assemblies combine the electrical box, support bracket, mud ring, far-side support and ground wire pigtail into a single solution that is ready to use right out of the box. The system provides the contractor with the flexibility to wire from the front or the back of the assembly. The open-back design allowsRead more about Erico-Caddy – All-In-One Electrical Assemblies[…]

K-Factor Transformers feature conductors capable of carrying the harmonic currents of non-linear loads without exceeding the temperature rating of the insulation system. The basic design takes into account the increase in naturally occurring “stray” losses caused by non-linear loads that can cause standard transformers to dramatically overheat and fail prematurely. The core and coil designRead more about Sola HD – K Factor Ventilated Distribution Transformers[…]

Division 1, Class 1 Rated… …the Energizer MSHD31 LED Headlight is approved as a intrinsically safe light by UL/CUL for safe use in hazardous locations*. Suited for use under the harshest conditions, the MSHD31 is not only rated to survive a 2m drop, but is a IPX4 weatherproof. The pivoting light has four easily changedRead more about Energizer – Intrinsically Safe LED Headlight[…]